No Image

Shape Generator : اعمال جنس و شرایط مرزی

Assign a Material On the Analysis tab Material panel, click Assign . In the Assign Materials dialog box, Override Material column, click the drop-list and select the material you wish to use. In the Safety Factor column, select Yield Strength or Ultimate Tensile Strength. These strengths...
read more
No Image

شروع کار با Shape Generator

To Start a Shape Generator Study Directly start a Shape Generator Study: Open the part file of interest. On the ribbon ۳D Model tab > Explore panel, click  Shape Generator. The ribbon displays the tools for generating a shape and a new Shape Generator...
read more
Learn_5) نقشه های AutoCad در صفحه دوبعدی اینونتور

Learn_5) نقشه های AutoCad در صفحه دوبعدی اینونتور

۲D AutoCAD data in sketches When you open an AutoCAD ® file in Autodesk Inventor, you can place 2D translated data: On a sketch in a new or existing drawing. As a title block in a new drawing. As a sketch symbol in...
read more
Learn_4) بلوکها و ایجاد مکانیزم با آنها ,Blocks

Learn_4) بلوکها و ایجاد مکانیزم با آنها ,Blocks

Overview of sketch blocks In many assembly designs, rigid shapes are repeated. You can use sketch blocks to capture such shapes as a fixed set, and place instances of the set where needed. You can define nested sketch blocks and...
read more
Learn_3) تغییر نوع رزوه پیش فرض در ابزار Hole

Learn_3) تغییر نوع رزوه پیش فرض در ابزار Hole

  How to change default thread type of tapped hole dialog box In Inventor part, when a hole feature is used and tapped hole selected, how is it possible to ۱) change the thread type proposed by default in the Hole...
read more
Learn_2) ایجاد سوراخ در دو راستا و پارامتر Extend Start برای ابتدای سوراخ

Learn_2) ایجاد سوراخ در دو راستا و پارامتر Extend Start برای ابتدای سوراخ

New Hole Settings Provide a Robust Way to Create Bi-Direction Holes You can now create a symmetric hole type that extrudes in two directions. The Flip Termination button is replaced with Direction1 and Direction 2 buttons. The Symmetric distance is...
read more
Learn_1) ایجاد پخ در بخش از یک لبه قطعه

Learn_1) ایجاد پخ در بخش از یک لبه قطعه

Support for Partial Chamfers You can now create a chamfer that does not require an entire edge. A new tab, Partial, is added to the Chamfer dialog box to support the creation of partial chamfers The settings on the Partial...
read more